SPECIFICATIONS

Brand Name: NoEnName_Null

Choice: yes

High-concerned chemical: None

Material: Other

Model Number: UV glue

Origin: Mainland China

Packing Pattern: Other

Type: Liquid Glue

application: plastic,glass, Metal TPU Crystal Jewelry Crafts

color: transparent

feature: strong adhesion

name: UV glue

312 UV Shadowless Glue Transparent for Tea Table Plastic Glass Crystal Jewelry Craft Metal

Use: plastic and plastic/plastic and metal

        plastic and glass/TPU

Brand: Zhanlida

product:312 uv glue

color: transparent

size: 10/50/250/1000ml

Warrenty: two years

Applicable materials：Transparent materials such as plastic

Main purpose：Paste plastic and various materials, plastic and glass, metal, etc

Advantages:High strength, good toughness, durable, fast curing, high temperature resistance, flat, no whitening

operation steps:

1: Wipe the place to be pasted

2: Evenly apply glue to the place to be pasted

3. The broken fragments shall be reset and pressed for several seconds according to the original track

4: Clean up the excess glue with a cloth to prevent the external glue from drying and hardening on the surface

5: Use an ultraviolet flashlight to shine on the bonding area. After 3-5 minutes, you can see no purple light. Leave it for 24 hours

matters needing attention

be careful!

Reasons for non-curing of glue

1: The material is not suitable: UV adhesive requires that at least one side of the two sides of the material to be bonded is transparent, otherwise the material is not suitable for UV adhesive

2. Insufficient UV intensity: If the amount of glue is large, choose a high-power UV lamp, otherwise the glue curing will be slow. If you choose UV curing under natural light (UV is invisible), choose a period of strong sunlight, and the natural curing speed will vary with the intensity of UV radiation.

3:The surface dry is not easy to cure: under most ultraviolet irradiation conditions, the glue can only be cured by irradiating the glue through transparent materials. If the glue is directly irradiated, it is difficult to cure. The glue is not suitable for surface coating.

Curing time

Different curing lamps will lead to different curing time. According to the experiment, it should be confirmed that high UV intensity can cure in a shorter irradiation time, otherwise it needs a longer curing time.

Control the exposure temperature according to the material

Many plastics have low heat resistance temperature, and need cooling treatment during curing to prevent excessive plastic deformation.

1. This product has slight irritation to the skin and eyes. If it enters the eyes accidentally, please wash it with plenty of water immediately. If there is still any discomfort, please go to the hospital for examination;

2 Wash immediately with soap and plenty of water after skin contact.

3. The remaining glue shall not be returned to the original packaging to avoid pollution, and shall be sealed and stored in a dark place.

4. Don't let children touch and play