15710-85K00 Fuel Injectors Nozzle Unit EAT317 for Suzuki 4-Stroke 40 50 60 HP DF40A DF50A DF60A Outboard Engine 15710-85K00-0000
15710-85K00 EAT317
Prix promotionnel
$80.99
Prix régulier $113.99
Passer aux informations sur le produit
15710-85K00 Fuel Injectors Nozzle Unit EAT317 for Suzuki 4-Stroke 40 50 60 HP DF40A DF50A DF60A Outboard Engine 15710-85K00-0000
Prix promotionnel
$80.99
Prix régulier $113.99
Expédition calculée lors du paiement.
SPECIFICATIONS
Brand Name: XRmarine
Condition: New
Engine: 4 Stroke
Engine Position: Outboard
Fit Brand: Suzuki
Fitment: 4-Stroke 40HP 50HP 60HP DF40A DF50A DF60A
High-concerned chemical: None
OEM Part #1: 15710-85K00, EAT317
OEM Part #2: 15710-85K00-0000
Origin: Mainland China
Replace Recmar: REC15710-85K00
Type: Fuel Injector Nozzle Unit
Fuel Injectors Nozzle Unit EAT317 for Suzuki 4-Stroke 40 50 60 HP DF40A DF50A DF60A Outboard Engine
Packa ge Included:
1 x Fuel Injector Nozzle Unit
Specifications:
Condition: Brand New
Replaces OEM Part #:
15710-85K00, EAT317
15710-85K00-0000
15710-85K00, EAT317
15710-85K00-0000
Fitment:
Fits the following Suzuki 4-Stroke Outboard Engine:
Fits the following Suzuki 4-Stroke Outboard Engine:
| Model | Rated HP | Stroke | Years | Notes |
|---|---|---|---|---|
| DF40A | 40HP | 4-Stroke | 2010-2024 | Serial 04003F-910001 and later |
| DF40AS | 40HP | 4-Stroke | 2018-2024 | Serial 04004F-910001 and later |
| DF50A | 50HP | 4-Stroke | 2010-2024 | Serial 05003F-910001 and later |
| DF50AV | 50HP | 4-Stroke | 2018-2024 | Serial 05004F-910001 and later |
| DF60A | 60HP | 4-Stroke | 2010-2024 | Serial 06002F-910001 and later |
| DF60AV | 60HP | 4-Stroke | 2018-2024 | Serial 06003F-910001 and later |
Installation Guide:
- Safety First: Disconnect the battery and wear safety glasses and gloves.
- Relieve Fuel Pressure: Follow your engine's service manual to safely relieve pressure from the fuel system.
- Disconnect Electrical Connector: Carefully unclip the wire harness from the existing fuel injector.
- Remove Old Injector: Unbolt and gently remove the old injector from the fuel rail. Be prepared for minor fuel spillage.
- Install New Injector: Lightly lubricate the new O-rings with clean engine oil and press the new injector firmly into place.
- Secure Injector: Re-install the mounting bolts and tighten to the manufacturer's specified torque.
- Reconnect: Attach the electrical connector to the new injector.
- Pressurize System: Reconnect the battery. Turn the key to the "On" position (without starting) a few times to prime the fuel pump and pressurize the system.
-
Check for Leaks: With the system pressurized, carefully inspect the injector and fuel rail for any signs of fuel leaks before starting the engine.
