SPECIFICATIONS

Brand Name: ETOPOO

Certification: NONE

Color: as shown

DIY Supplies: Metalworking,Metalworking

High-concerned chemical: None

Model Number: LTC15

Origin: Mainland China

Semi-finishedproduct: No

Size: 19cm*7cm*5.5cm

Special Features: Adjustable Magnetic Gauge Tool

Type: Garage Door Hardware

First, the instructions for use:

1. Remove the four-wheel positioning sensor (clamp) and remove the tire;

2. Carefully suck the magnetic level on the side of the brake wheel;

3. Adjust the level to zero;

4. Install the required positioning special parts;

5. Use special tools to adjust the positioning of the parts to the desired measurement angle with the help of the magnetic level indicator.

6. If you find a slight deviation with the locator, you only need to fine-tune it at the bottom of the car. (Generally a little deviation will not cause positioning,Should be placed in a horizontal position）

Second, use:

After using the four-wheel aligner to measure the data, for example, if the locator measurement data camber angle is greater than the specified value minus 1 degree, then you need to remove the positioning fixture, remove the tire, and replace the required four-wheel alignment special parts. You will need a magnetic level produced by our center. In the past, operators used their own experience to adjust the inclination, and sometimes there were errors. Using the level produced by our center, it can be accurately adjusted to the required measurement angle.