ANENG RC01 Digital Gauge Angle Measurement Tool Goniometer Electronic Protractor Multi Angle Ruler Woodworking Angle Finder
ANENG RC01 Digital Gauge Angle Measurement Tool Goniometer Electronic Protractor Multi Angle Ruler Woodworking Angle Finder
SPECIFICATIONS
Auto Shutdown: Auto power off after 6 minutes of inactivity
Battery Type: CR2032 3V button battery (without battery)
Brand Name: ANENG
Certification: CE
Choice: yes
DIY Supplies: Electrical
Data retention: Yes
Hanging hole: Yes
High-concerned chemical: None
Measurement range: 0.0°~999.9%
Model Number: ANENG RC01 Electronic Angle Gauge
Operating Humidity: <85% relative humidity
Operating Temperature: 0℃~+50℃
Operating current: ≤30 microamperes
Origin: Mainland China
Precision: ±1%+0.5°
Resolution: 0.1
Scale display: Yes
Semi-finishedproduct: No
Tension dial: Yes
Zero value reset: Yes
ANENG RC01 Angle Gauge Detector Digital Display 2 in 1 High Accuracy Mutifunction Scale Suitable for Woodworking Measurement Tools
1. Technical data:
(1) Measurement range: 0.0 °~999.9 °
(2) Working humidity:<85% relative humidity
(3) Resolution: 0.1
(4) Working temperature: 0 ° C~+50 ° C
(5) RC01: Battery model: CR2032 3V battery
(6) Working current: ≤ 30 microamperes
(7) Accuracy: ± 1%+0.5 °
2.RC01 Parameter technical indicators
|
Function |
Resolution |
|
Measurement range |
0.0°~999.9% |
|
Operating Humidity |
<85% relative humidity |
|
Resolution |
0.1 |
|
Operating Temperature |
0℃~+50℃ |
|
Operating current |
≤30 microamperes |
|
Precision |
±1%+0.5° |
|
Battery Type |
CR2032 3V button battery (without battery) |
|
Auto Shutdown |
Auto power off after 6 minutes of inactivity |
|
Data retention |
√ |
|
Hanging hole |
√ |
|
Scale display |
√ |
|
Tension dial |
√ |
|
Zero value reset |
√ |
THE PARAMETERS ARE FOR REFERENCE ONLY,AND THEACTUAL MEASUREMENT OF THE SPECIFIC EQUIPMENT SHALL PREVAIL！
3. Packing:
1 * Packing box
1 * Angle ruler
1 * Manual
4. Battery:
(1)To replace the battery, please press the raised part at the bottom of the LCD screen, and the edge of the battery box will appear above.
(2) Pull out the battery box.
(3) The negative pole of the battery is facing up and the positive pole is facing down.
(4) Push the battery box back to its original position.
