Material: Pp + 430 Stainless Steel

Suitable Spacer: 2mm-8mm/0.08-0.31in

With 3 Packs Of Tile Leveling Crosses Of Different Specifications, It Is Suitable For More Different Occasions:

Leveling Cross: Specification 1.0mm/0.04in, Thickness 2.5mm/0.1in, Length 22mm/0.87in, Scope Of Application: Seamless Tiles, Polished Tiles

Leveling Cross: Specification 2.0mm/0.08in, Thickness 2.5mm/0.1in, Length 22mm/0.87in, Scope Of Application: Wall Tiles, Tiles

Leveling Cross: Specification 3.0mm/0.12in, Thickness 2.5mm/0.1in, Length 23mm/0.91in, Scope Of Application: Antique Bricks, Outdoor Bricks

Wear-resistant, Reusable.

Easy To Use For Diy Operation.

Keep The Tile Balance On The Same Horizontal Position.

Improve Tile Installation Speed.

Reduce Installer Fatigue/stress.

Virtually Lippage Free, Flat Surface Drastically.

Reduces The Need For Grinding And Polishing.

Prevents Tiles From Moving While Curing.

Paving The First Tile, Leaving An Appropriate Distance (Use With Cross Spacer). Close To The Tiles.

Insert T-shaped Needle Along The Gap In The Tile.

Then 180 Degree Rotation,t-shaped Needle Stuck At The Bottom Of The Two Tiles.

Adjust The Caps With Your Hand/special Wrench Until The Two Tiles Are On The Same Level.

About 4-6 Hours After Leveling, Before Cement/adhesive Is Completely Dry, Rotate Caps In The Reverse Direction, Remove 180° T-needle Until The Word, Take Out.

50 X Tile Levelers

1 X Wrench

100 X 1mm Leveling Cross (1 Pack)

100 X 2mm Leveling Cross (1 Pack)

100 X 3mm Leveling Cross (1 Pack)