Motor Self-Learning (️️️First Step After Wiring)
1. Power OFF, wheel off ground → hold power button 10s (1s: beep+display on; 10s: 3 beeps) → ~80s → 3 beeps = done.
2. If motor runs backward → swap phase wires（such as yellow-blue) → repeat Step 1 until forward.
️ Do not perform any other operations during self-learning.
Note: Ensure all plugs are securely inserted without any wobbling.

1200W High Power Electric Scooter Controller for Xiaomi5 MAX/PRO - Intelligent Control System with APP Connection, 5 Riding Modes, 7 Battery String Options
Bullet Points
1200W High Output Power - With powerful power output, it drives the motor and rear taillights, providing a robust riding experience
7 Battery String Options - Supports 6/8/10/12/13/14/15 battery strings, with 13 strings preset at the factory, and adapts to multiple battery specifications
5 Riding Modes - Comfort / Standard / Sport / Power / Extra Power: 5 modes to meet different riding needs
Smart APP Control - Support mobile APP connection to achieve intelligent control and parameter adjustment
Foolproof Connection Design - The fool-proof wiring design ensures that incorrect orientation cannot be inserted, thereby guaranteeing safe installation
Waterproof Connector - The waterproof plug design enhances the durability and safety of the product
Comprehensive Display - Display key information such as mileage, battery level, and gear position, making the riding status clear at a glance
Upgraded Version - The latest upgraded product is compatible with Xiaomi series scooters, offering more reliable quality
Product Introduction:
Intelligent Main Controller:After receiving signals from the control panel, respond promptly and send instructions to drive the motor and rear taillights (output power: 1200W)
Display and Control Panel:Switch on/off, display mileage, shift, turn on/off lights, respond to phone APP commands
Turn Signal Module: Power and Control for Turn Signals
Fixing Pad (60*75 *4.5MM): For fixed controllers

Installation Instructions (Simplified Version)
Wiring Precautions
Power Connection: Positive to positive (Controller red wire → Battery red wire), negative to negative (Controller black wire → Battery black wire)
Hall Sensor Wire Connection: Main controller red wire → Motor red wire, Main controller black wire → Motor black wire. Anti-reverse design ensures correct connection.
Control Bus Connection: Install waterproof connector aligned with “↓↑” markings to prevent reverse insertion damage.
Turn Signal Board Connection: Input connects to control panel 5V power supply. Output connects to turn signal power wires and signal wires.
APP Installation Steps
1. Open the APP software, select “Open Frequently Used Apps,” and enter the installation interface.
2. Tap the “Install” button to proceed to the security prompt screen.
3. Check the risk warning box and tap “Continue Installation.”
4. Enter your lock screen password. After unlocking, installation completes. Tap “Done” to start using the app.
Usage Precautions
1 Installation Requirements: Connect and install according to the corresponding interfaces shown in the images. Seek professional guidance when necessary.
2. Battery Configuration: Incorrect battery string settings may reduce range or trigger safety protections.
3. Power Matching: Select riding modes matching your battery's output power to avoid using high-power modes with low-capacity batteries.
4. Waterproofing: Though equipped with waterproof connectors, avoid prolonged submersion in water.
5. First Use: Before operation, thoroughly review the product manual (available on the product details page) to understand all functions and operating procedures.