45g 180g 760g Transparent Traceless Zhanlida Acrylic Organic Glass Glue PMMA PC Endurance Board 30 Seconds Quick Drying Adhesive

Note:This Glue is only suitable for bonding between acrylic (organic glass,PMMA),ABS,PC plastic.other materials are not suitable

Product Name: Acrylic Adhesive

Product odor: Mild odor

Product color: colorless transparent liquid

Product specifications: 45g,180g,760g

Preliminary dry fixation for 30 seconds

Best Dry Solidification 24 hours

The operation time is about 30 seconds

matters needing attention

Only stick acrylic,organic glass,PMMA,and PC boards. Other materials may have corrosion.

Free tools for more convenient operation

760g gloves and syringes

180g and 45g gloves and needle feeding nozzles

Small area fine operation 760g packaging: Use a syringe to absorb the glue solution and slowly push the tube. Fine dispensing 180g and 45g packaging: After installing the needle nozzle,slowly squeeze the bottle body and fine dispensing

Large area adhesive application can be applied directly on the bonding surface！

Instructions for Use

Clean the acrylic bonding surface first,and if a new acrylic board is needed,remove the masking paper from the area that needs to be bonded first.

Assemble the acrylic and use a glue needle to slowly penetrate along the gaps in the joint. The operation should be carried out as evenly as possible to ensure even glue application.

Open the glue bottle cap,install a needle nozzle for small and medium-sized bottles,and use a syringe to extract the glue for large bottles.

After applying the adhesive,keep pressing the bonding position for about 30 seconds,and the adhesive can be released after initial curing.

complete

Continue to repeat the above bonding steps,finally remove the shielding paper,and the acrylic product is basically formed! After standing for 24 hours,the curing is complete. Acrylic products completed!