Contact with us before ORDER

1. Recheck express fee. It is not easy to set express fee well on aliexpress because of uncertain weight.

2. We need to know detailed products info, like signal input, output, capacity ect., before delivery.

Product Introduction

1. Waterproof design and good sealing of enclosure and cable joint

2. Internal precision and amplifying circuit and high accuracy

3. Current and voltage output at the same time and free choice through terminal

4. Connect to all kinds of strain gauge bridge-type load cell, such as weighing, tension, compression torque and so on

Technical Data

1. Power Supply 24VDC （18-27Vdc）
2. Max Power： 4W（when parallel connection load cell 4pcs of 350Ω and output 20mA）
3. Wiring Mode: screw-type wiring terminal
4. Net Weight: 100g
5. Dimension: 115x58x33(mm) (LxWxH)
6. Working Temperature Range: -10℃ to 50℃
7. Storage Temperate Range: -20℃ to 80℃
8. Humidity: 85%RH, no condensation
9. Load Cell Sensitivity Range: 2.0mV/V±10%
10. Voltage Zero Adjustment Range: precision: 10%F.S., extension: 40%F.S.
11. Voltage Full-scale Adjustment Range: 10% F.S.
12. Current Zero Adjustment Range: 10% F.S.
13. Current Full-scale Adjustment Range: 10% F.S.
14. Precision: better than 0.3% F.S.
15. Temperature Drift: better than 100ppm
16. Load Cell Excitation Voltage: 5Vdc±5% (for load cell with excitation voltage 5-12V)
17. Load Cell Excitation Current: <60mA
18. Signal Output: 0-5V or 0-10V and 4-20mA
19. Voltage Output Resistance: >5kΩ
20. Current Output Resistance: <500Ω

Order Attention

1. Factory Default Sensitivity: （2.0±10%)mV/V
if not in this range, please leave message to us
2. Factory Default Output: (0-5)V&(4-20)mA
There is one dail switch inside, which user can adjust 0-5V or 0-10V. However, if you use the output special, please make sure to leave message to us.

We need to change resistor for special sensitivity and output.